FX-8801
Hakko T18-I · sharp straight conical
14.5 mm straight working profile, 0.2 mm point radius.
Price info
This is a monthly price snapshot supplied by Rainforest, not a live quote. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
View on AmazonAmazon and the Amazon logo are trademarks of Amazon.com, Inc. or its affiliates.Orders and payment take place on Amazon.
How it fits the work
The I has a straight sharp profile for approaching a single point head-on. Compare it with the BR02 if you need to keep the pencil offset, or with the D08 when you have room to place a flat on the joint.
Working profile
- Brand
- Hakko
- Tip geometry
- sharp straight conical
- Variant details
- 14.5 mm straight working profile, 0.2 mm point radius.
Check the handle
FX-8801 and other documented T18 handpieces.
Care for the working face
After cleaning, cover the working face with fresh solder before putting the iron away. Hakko recommends checking for pits or an altered working profile when a tip stops wetting properly. Care instructions
Questions before buying
Does a 0.2 mm callout give the diameter of the entire taper?
It specifies the point radius on the drawing. The tip gets wider farther back, so compare the side profile if you must reach between neighboring parts.
Compare a related tip
The BL offers a longer taper with the same nominal point radius.