FX-8801
Hakko T18-S7 · angled face
60-degree angled end, 14.5 mm working profile.
Price info
This is a monthly price snapshot supplied by Rainforest, not a live quote. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
View on AmazonAmazon and the Amazon logo are trademarks of Amazon.com, Inc. or its affiliates.Orders and payment take place on Amazon.
How it fits the work
Compare the S7 with the longer S6 when the approach calls for an angled face but the space above the board is shallow. Check the cross section in the drawing before relying on the angle alone.
Working profile
- Brand
- Hakko
- Tip geometry
- angled face
- Variant details
- 60-degree angled end, 14.5 mm working profile.
Check the handle
FX-8801 and other compatible irons listed for T18-S7.
Care for the working face
After cleaning, cover the working face with fresh solder before putting the iron away. Hakko recommends checking for pits or an altered working profile when a tip stops wetting properly. Care instructions
Questions before buying
What should I compare when replacing a discontinued 900M-T-S7?
Hakko lists T18-S7 as its replacement. Check the handpiece model and the drawing’s angled face before changing to another 900M or T18 shape.
Compare a related tip
The longer S6 reaches farther when the angle works but the S7 stops short.