FX-8801
Hakko T18-C3 · 3 mm bevel
3 mm nominal diameter at a 45-degree bevel.
Price info
This is a monthly price snapshot supplied by Rainforest, not a live quote. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
View on AmazonAmazon and the Amazon logo are trademarks of Amazon.com, Inc. or its affiliates.Orders and payment take place on Amazon.
How it fits the work
The wide angled face can sit against a terminal with room for the bevel. Compare the C3 with a C2 if a nearby solder joint reduces side clearance. Check that the chosen listing says C3 if you are matching an existing tip.
Working profile
- Brand
- Hakko
- Tip geometry
- 3 mm bevel
- Variant details
- 3 mm nominal diameter at a 45-degree bevel.
Check the handle
FX-8801 and other documented T18 handpieces.
Care for the working face
After cleaning, cover the working face with fresh solder before putting the iron away. Hakko recommends checking for pits or an altered working profile when a tip stops wetting properly. Care instructions
Questions before buying
Which part of the bevel width matters beside a nearby joint?
Check where the angled face sits when rotated onto the work. Its 3 mm nominal size can reach across more of a terminal than the 2 mm CF2.
Compare a related tip
Hakko T18-CF2 · 2 mm face-tinned bevel
The CF2 gives a smaller bevel with face-only tinning.