T15 · T39
Hakko T15-D52 · 5.2 mm chisel
5.2 mm working width, 1.2 mm face thickness and 8 mm working profile.
Price info
This is a monthly price snapshot supplied by Rainforest, not a live quote. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
View on AmazonAmazon and the Amazon logo are trademarks of Amazon.com, Inc. or its affiliates.Orders and payment take place on Amazon.
How it fits the work
The D52 gives a wide flat face for an exposed connector tab. Compare it with the longer DL32 when a housing obstructs the approach. The D52 adds width, so check side clearance as well as the short working length.
Working profile
- Brand
- Hakko
- Tip geometry
- 5.2 mm chisel
- Variant details
- 5.2 mm working width, 1.2 mm face thickness and 8 mm working profile.
Check the handle
Hakko FM-2027 and other documented T15-compatible handpieces.
Care for the working face
After cleaning, cover the working face with fresh solder before putting the iron away. Hakko recommends checking for pits or an altered working profile when a tip stops wetting properly. Care instructions
Questions before buying
When would the D52 be too wide for a power connector?
If the 5.2 mm face would touch an adjacent pin or plastic wall, step down in width. Use the D52 when the exposed tab accommodates most of its flat.
Compare a related tip
Hakko T15-DL32 · 3.2 mm long chisel
The 3.2 mm DL32 offers more reach with a narrower flat.