FX-8801
Hakko T18-D24 · 2.4 mm chisel
2.4 mm working width, 14.5 mm working profile.
Price info
This is a monthly price snapshot supplied by Rainforest, not a live quote. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
View on AmazonAmazon and the Amazon logo are trademarks of Amazon.com, Inc. or its affiliates.Orders and payment take place on Amazon.
How it fits the work
The 2.4 mm face gives the T18 user a broader contact patch than the D08. On a connector pad with room around it, the flat can sit against more of the joint. Confirm T18 on the handpiece parts list before ordering.
Working profile
- Brand
- Hakko
- Tip geometry
- 2.4 mm chisel
- Variant details
- 2.4 mm working width, 14.5 mm working profile.
Check the handle
FX-8801 handpiece and other irons with T18-D24 explicitly listed.
Care for the working face
After cleaning, cover the working face with fresh solder before putting the iron away. Hakko recommends checking for pits or an altered working profile when a tip stops wetting properly. Care instructions
Questions before buying
Will the 2.4 mm face fit between pins on a crowded connector?
Compare the full width against the gap around the joint with the chisel turned to its working angle. If the flat overlaps a neighboring pin, start with the 1.6 mm D16.
Compare a related tip
The D16 is narrower for tight joints while retaining a flat edge.