C115 · C210 · C245
JBC C245-935 · 0.8 mm bent conical
0.8 mm nominal bent conical, 13 mm working profile in the guide.
Price info
This is a monthly price snapshot supplied by Rainforest, not a live quote. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
View on AmazonAmazon and the Amazon logo are trademarks of Amazon.com, Inc. or its affiliates.Orders and payment take place on Amazon.
How it fits the work
The 0.8 mm bent end can reach a pad beside a socket where the fine C245034 would give less contact. Match the complete cartridge number to a documented T245 handle.
Working profile
- Brand
- JBC
- Tip geometry
- 0.8 mm bent conical
- Variant details
- 0.8 mm nominal bent conical, 13 mm working profile in the guide.
Check the handle
JBC T245 general-purpose handle with C245 cartridges.
Care for the working face
Before returning the iron to its stand, cover the working area with fresh solder. JBC advises against abrasive cleaners on the plated area. Care instructions
Questions before buying
Why choose 0.8 mm when the pad is beside a tall part?
Use the bent end to keep the shaft offset. Choose 0.8 mm if the exposed pad can accommodate the larger point, or 0.4 mm if the gap narrows near the joint.
Compare a related tip
JBC C245-034 · 0.4 mm bent conical
The C245034 narrows the point and working profile for a tighter area.